逍遥学能 2018-11-15 15:37
名词<物>惯性，惰性; 迟钝; 不活动
名词passivity inactivity
名词energy vigour
inertia
名词
1. Inertia carried the train past the station.
惯性使火车驶过了车站。
2. I get a feeling of inertia on a hot summer day.
在盛夏我有一种懒洋洋的感觉。
inertia
1. 惰性：我告诉他,也许是因为惰性(inertia)使我不想学. 他要知道这个字的意义,我念了字典上的定义:「物体在除非受到外力影响下,否则维持静者恒静,动者恒动,不改变方向的倾向. 」唐望说他年轻时也曾经在欧萨卡市集中卖药草. 他仍记得他的推销词,
2. 惯：在较少情况下是基于羞涩感,而在大多数情况下则时基于对安适(comfort)、习惯(inertia)的渴慕--简言之,即是旅行家所说的懒惰的倾向. 旅行家是对的:较之怯弱,人更是懒惰的,并且,人们最害怕的是某种绝对忠心(honesty)和赤诚(nudity)强加于他们身上的麻烦.
inertia
1. He personally experiment to determine the law of free-fall and found that: The object of the law of inertia, a reasonable law, such as when the pendulum vibration, the law of Motion put forward a campaigns of the principle of relativity, but also on the speed, acceleration and so on kinematics The basic concept of making a strict definition.
他通过亲自实验，确定了自由落体定律，发现：物体的惯性定律、合理定律、单摆振动的等时性、抛体运动规律，提出了运动的相对性原理，还对速度、加速度等运动学的基本概念做出了严格的定义。
2. Remember, inertia is a powerful force.
记住惯性是一种很大的力量。
3. Again, inertia is a very strong force.
惯性是非常强的力量，我之前提到过。
4. Because of the rotary pump with a lower inertia force components, it can use very high speed
因为泵内的回转部件惯性力较低，故可使用很高的转速
5. In chapter two, firstly, the systems with nonlinear inertia force in vibrating machine are analyzed.
因此，研究振动利用工程中的非线性问题在理论上和实际工作中都具有积极的意义。
6. This portion of the subject deals with such ideas as inertia, motion, force, and energy.
这一部分物理学研究像惯性、运动、力、和能量这类概念。
inertia的反义词
7. Since the rotary pump with a lower inertia force components, it can use very high speed
3因为泵内的回转部件惯性力较低，故可使用很高的转速
8. Due to historical and practical reasons, however, the inertia psychology of peasants has greatly restrained the development of countryside.
但由于历史和现实的众多缘由，造成农民的惰性心理情结，极大程度地束缚着农村发展的步伐。
9. Changes of inertia of uterus and duration and interval of uterine contraction were investigated in the two groups.
观察电针合谷对子宫收缩乏力的影响，以及对宫缩持续时间和间歇时间的影响。
10. Inertia properties, and shear center determination.
翘曲硬化和惯性属性、剪切中心定义的精确结果。
11. An offset printing press of the relative influence of spatially and temporally inertia forces, to make the ink is ideal to paper, paper must have a certain amount of surface strength.
胶印机的速率很快，响答来讲惯性辛的感化不绝差增大，给使油不朱能比辛抱负地转印到纸弛上，不离请求纸弛务必具有必定的暗地强量。
12. The static model of torsion joint is based on that of bending joint. The effects of structure parameters inside air pressure, initial angle, rube average radius, rube shell thickness on the turning angle are analyzed and the following conclusions are drawn: the relationship between the angle of torsion joint and the inside air pressure is basically linear, the angle of torsion joint increases with the initial angle and rube average radius, the angle of torsion joint decreases while the rube shell thickness increases. The kinetic equation is built for torsion joint. Simulating experiment implies that the time of inflating and deflating process is extremely shorter than that of kinetic process. So the pneumatic process can be ignored in actual system design and control. The factors that affect the dynamic features of torsion joint, such as shell thickness of rubber tube, average radius, initial angle, connector's outlet area, moment of inertia and viscous damping coefficient, are analyzed and the following conclusions are drawn: the change of rube shell thickness has no effects on the dynamic process of FPA inside air pressure while greatly affects the turning angle of torsion joint; when the rube shell thickness is small, the torsion joint has a bigger turning angle, no overshoot and long risetime, when the shell thickness is big, the turning angle of torsion joint is small, but has high response speed, overshoot and low shock; when the rube average radius increases, the turning angle of torsion joint increases and the overshoot increases too; when the initial angle of torsion joint is big, the turning joint is big, the overshoot is small and shock is low, but the risetime is big; the connector's outlet area affects the dynamic process of FPA inside air pressure greatly, but has no effects on the dynamic process of turning angle; moment of inertia and viscous damping coefficient have no effects on the dynamic process of FPA inside air pressure, but affect the dynamic process of turning angle greatly.
在弯曲关节模型推导的基础上，建立扭转关节的静态模型，并分析了扭转关节内腔压力，初始转角，橡胶管平均半径，橡胶管壁厚等参数对关节转角的影响，得出扭转关节的转动角度与充入FPA内腔的压缩气体压力之间基本呈线性关系，扭转关节的转角随初始角度和橡胶管平均半径的增大而增大，扭转关节的转角随橡胶管壁厚的增大而减小的结论；建立了扭转关节的动力学方程，仿真实验表明FPA的充放气过程与扭转关节的动力学过程相比时间极短，在实际系统设计和控制过程中可以忽略不计；分析讨论橡胶管壁厚，平均半径，初始角度，气体节流口面积，转动惯量，粘性阻尼系数等因素对扭转关节动态特性的影响，得出橡胶管初始壁厚的变化对扭转关节FPA内腔压力的动态响应几乎没有影响而对关节转角的响应曲线影响比较明显，壁厚较小时，关节可以得到较大的转角，并且转角的响应曲线没有超调，但上升时间长，壁厚较大时，关节转角变小，响应加快，但是有超调和轻微振荡现象，橡胶管平均半径越大，得到的关节转角越大，但是转角响应的超调量也随之增大，FPA的初始角度越大，关节的转角越大，并且超调量减小，振荡减弱，但是上升时间增大，管接头出口面积的大小对关节FPA内腔压力的建立过程影响较大，但对关节转角的动态响应几乎没有影响，转动惯量和粘性阻尼系数对FPA内腔压力的动态过程几乎没有影响而对扭转关节转角有较大影响等结论。
13. However, think of the inventory decline Vanke provision ready, we are worried: at least some provision for the project is unable to control high prices to get the product of inertia.
不过，库存下降提供准备万科认为，我们所担心的：至少在一些项目的规定，是无法控制的高价格来获得惯性的产物。
14. Just as linear momentum is the product of mass and velocity, so the angular momentum of a body is defined as the product of its moment of inertia and its angular velocity.
这句话的意思是：正如线性动量是质量和速度的乘积一样，一个物体的角动量定义为惯性矩和它的角速度的乘积。
15. This paper introduces a method of determining missile's product of inertia by a series of moment of inertia measurements with the missile oriented in six different positions in addition to calculating principal axis orientation.
描述了一种通过测量导弹在六个不同位置的转动惯量来计算导弹惯性积，进而计算导弹纵轴与主惯性轴夹角的方法。
16. A speedy method of the Ichnography Geometry Quality Based On AUTOCAD Is introduced in this paper, A good method is provided for the Calculating of parameter such as center of shape, moments of inertia, product of inertia, and so on.
提出了一种基于AUTOCAD软件计算平面图形几何性质的方法，为机械设计时计算形心、惯性矩、惯性积等参数提供了一个捷径。
inertia的翻译
17. Regardless of the angular acceleration produced and moment of inertia of pavemill, in order to ensure stable operation from paper tape, you should meet the following conditions are true
在不考虑由角加速度产生的惯性力矩和阻力矩的前提下，为保证纸带稳定运行，应该满足下面的条件
18. Under a force of inertia, i want to.
在惯性之下，我会的。
19. These forces have to be higher than the combination of the force of the inertia and the resistance forces of the yarn bobbin and the reserve system.
这些部队将高于相结合的力量的惯性和抵抗力量的纱筒管和储备制度。
20. The characteristics of the inertia force divides deformation process into the period of energy storing and the period of energy dissipation.
根据惯性力的特点，将管件变形过程分为能量贮存和能量耗散两个阶段。
1. 惰性;迟钝;怠惰
If you have a feeling of inertia, you feel very lazy and unwilling to move or be active.
e.g. ...her inertia, her lack of energy...
她的怠惰和缺乏活力
e.g. This might help you overcome inertia.
这可能有助于你克服惰性。
2. 惯性
Inertia is the tendency of a physical object to remain still or to continue moving, unless a force is applied to it.
1. The magnitude of the problem and the difficulty in finding a comprehensive solution for it should not force us into a state of inertia.
2. But the demand for continuous innovation is always in conflict with inertia of an enterprise.
3. inertia
3. It is still in the process of a fast urbanization and industrial modernization, and there is still a strong inertia for fast economic growth.
4. Out of inertia, the deer jumped over Ding and fell on the ground.
5. It is kind of laziness and inertia to take a ride on the same rail track with the Western dominated international institutions and systems.
6.
6. But it only reveals perilous political inertia when strength is needed to meet the real challenges in a time of crisis.
7. India offers its own brand of bureaucratic inertia, in a civil service shaped by British colonial administration.
8. inertia
8. Indeed, ignorance and inertia are to blame in many prominent cases of pollution.
9. This discouraged failure as a father and husband suffers from compete inertia.
10.
10. But admirable national policies are being implemented slowly and surely against inertia.
noun
1. a disposition to remain inactive or inert
e.g. he had to overcome his inertia and get back to work
Synonym: inactiveness inactivity
2. (physics) the tendency of a body to maintain its state of rest or uniform motion unless acted upon by an external force